Metalworking fluid
You are here:Home > PACOIL > WORKING PRODUCT > Metalworking fluid
Pacoil EC-260 Water-Soluble Metalworking fluid
Description：
Pacoil EC-260 is semi-synthetic metal working fluid, fortified with new material and new micro emulsification technology to make a transparent semi-synthetic metal working fluid, it is suitable for ferrous and non ferrous metal cutting and grinding operations. It is very stable and has good corrosion protection, good tramp oil rejecting ability, good bio-stability. It can extend service life and reduce cost, it is a very economical choice of metal working fluid.
Application：
1.Suitable for cutting of low to moderate duty machining.2.Suitable for cutting and grinding for different type of ferrous and non ferrous metal, especially all kinds of steel and cast iron grinding.
Pacoil EC-260 is semi-synthetic metal working fluid, fortified with new material and new micro emulsification technology to make a transparent semi-synthetic metal working fluid, it is suitable for ferrous and non ferrous metal cutting and grinding operations. It is very stable and has good corrosion protection, good tramp oil rejecting ability, good bio-stability. It can extend service life and reduce cost, it is a very economical choice of metal working fluid.
Application：
1.Suitable for cutting of low to moderate duty machining.2.Suitable for cutting and grinding for different type of ferrous and non ferrous metal, especially all kinds of steel and cast iron grinding.
Advantages
●Excellent stability and not easy muddy.
●Excellent cooling, cleaning and good lubricity performance.
●The tramp oil separate from the fluid and floating on top prevents fluid from contamination and convenience to clean up or re-use.
●Excellent bio-resistance, no odour, provides friendly working environment and long service life.
●Low odor and foaming, excellent rust resistance.
●Sulfur, phosphor, Chlorine free, nitrite-free and does not contaminative environment, ensures minimize skin irritation and paint stripping.
Recommended Dilution
Suggested dilution for metalworking: | Cutting, drilling | Sawing | Surface grinding | Grinding OD | |
EC-260 | Cast iron | 10 : 1 | 10 ~ 20 : 1 | 10 ~ 20 : 1 | 10 ~ 20 : 1 |
Steel | 10 : 1 | 10 ~ 25 : 1 | 10 ~ 25 : 1 | 10 ~ 25 : 1 | |
Aluminium | 10 : 1 | 10 : 1 | ----- | ----- | |
Typical Data
Product Name | EC-260 |
Appearance (concentrate) | Red |
Density (kg/l,20℃) | 1.09 |
pH value(5%) | 8.5~9.5 |
Refraction coefficient | 2.2 |
Copper corrosion (55±2℃/24h, 5%) | 1a |
Corrosion (Single，35±2℃/24h, 5%) | Pass |